船台测量场中多级转站的不确定度

对在船台测量场内利用全站仪进行多级转站测量时误差的传递过程进行研究,分析误差的来源及其累积方法,建立转站过程中误差传递的数学模型,并据此推导出多级转站测量的系统误差传递公式及其不确定度估计公式。采用蒙特卡洛方法开展考虑全站仪测量误差的多级转站过程仿真试验,并将仿真结果与计算结果相对比。结果表明,提出的误差估计方法能较好地反映多级转站时误差的传递过程和不确定度的分布规律。     

Numerical simulation of level ice impact on landing craft bow considering the transverse isotropy of Baltic Sea ice based on XFEM

Ice bending is a major failure mechanism of level ice when ships and marine structures interact with level ice. This paper aims to investigate the ice bending and ice load when level ice collides on ships and marine structures using numerical simulation method, and compare the numerical results with field test. The fracture of ice is simulated with extended finite element method (XFEM), and cohesive zone concept is used to describe the crack propagation. In order to consider the characteristics of S2 columnar ice, a transversely isotropic elastic material model is used for the ice bulk elements, and a transversely isotropic Tsai-Wu failure criterion is adopted to predict the initiation of cracks. A well-controlled field test of a landing craft bow colliding with level ice in Baltic Sea is simulated to verify the numerical scheme. The ice plate's continuous deformation, crack initiation and crack propagation at different impact velocities and angles are simulated and the results are discussed. In the simulation, the bending crack emerges at the midline of the top surface of ice plate, then propagates towards free boundary, and finally a circumferential crack forms. It is found that with the impact velocity increases, the bending load increases and the fracture size (perpendicular distance from the crack to the contact edge) decreases. And as the angle between the landing craft bow and vertical direction increases, the bending load and the fracture size decrease. The simulated results corresponds well with the field test. The competition between the circumferential crack and radial crack is also found in the simulation and will be discussed in this paper. The results show that this method well simulates the bending of level ice and predict the ice load, and provides a good approach for investigating the mechanism of different forms of level ice fracture.     

机车车辆轮对内距尺检定装置计量比对

在阐述计量比对定义基础上,分别从比对实验室、比对项目和方法、比对路线和时间安排、传递装置、比对试验过程、参考值及其测量不确定度、参比实验室结果报告共7个方面,论述机车车辆轮对内距尺检定装置的计量比对方案。通过处理计量比对结果,分析个别参比实验室比对结果未达到合理预期的原因,提出建议,为进一步保障内距尺量值传递的准确可靠奠定基础。     

Optimal development of alternative fuel station networks considering node capacity restrictions

A potential solution to reduce greenhouse gas (GHG) emissions in the transport sector is the use of alternative fuel vehicles (AFV). As global GHG emission standards have been in place for passenger cars for several years, infrastructure modelling for new AFV is an established topic. However, as the regulatory focus shifts towards heavy-duty vehicles (HDV), the market diffusion of AFV-HDV will increase as will planning the relevant AFV infrastructure for HDV. Existing modelling approaches need to be adapted, because the energy demand per individual refill increases significantly for HDV and there are regulatory as well as technical limitations for alternative fuel station (AFS) capacities at the same time. While the current research takes capacity restrictions for single stations into account, capacity limits for locations (i.e. nodes) – the places where refuelling stations are built such as highway entries, exits or intersections – are not yet considered. We extend existing models in this respect and introduce an optimal development for AFS considering (station) location capacity restrictions. The proposed method is applied to a case study of a potential fuel cell heavy-duty vehicle AFS network. We find that the location capacity limit has a major impact on the number of stations required, station utilization and station portfolio variety.     

内容中心网络系统及其在船联网中的应用

文章根据信息技术发展趋势,提出将内容中心网络与现有技术结合,建设新的船基信息网络的方法。介绍了内容中心网络的系统结构与工作原理,并以船基数据传输系统为研究对象,建立了相应仿真模型。通过分析网络的内容缓存命中率、内容服务器负载、系统传输速度与完成一次数据传输所需经过的路由跳数等性能评价指标,指出了内容中心网络相比于IP网络等现有网络的优点,并验证将该技术应用在船联网中的优势与可行性。     

Evaluation of pedestrian crosswalk level of service (LOS) in perspective of type of land-use

In India pedestrians usually cross the road at mid-block crosswalks due to ease of access to their destination or the development of adjacent land use types such as shopping, business areas, school and residential areas. The behaviour of pedestrian will change with respect to different land use type and this change in behaviour of pedestrian further reflects change in perceived level of service (LOS). So, it is important to evaluate the quality of service of such crossing facilities with respect to different land-use type under mixed traffic conditions. In this framework, pedestrian perceived LOS were collected with respect to different land-use type such as shopping, residential and business areas. The ordered probit (OP) model was developed by using NLOGIT software package, with number of vehicles encountered, road crossing difficulty as well as safety considered as primary factors along with pedestrian individual factors (gender and age), land-use type and roadway geometry. From the model results, it has been concluded that perceived safety, crossing difficulty, land-use condition, number of vehicles encountered, median width and number of lanes have significant effect on pedestrian perceived LOS at unprotected (un-signalized) mid-block crosswalks in mixed traffic scenario. The inferences of these results highlights the importance of land use planning in designing a new set of pedestrian access facilities for unprotected mid-block crosswalks under mixed traffic conditions. Also the study results would be useful for evaluating pedestrian accessibility taking into account different land-use type and planning required degree of segregation with vehicular movement at unprotected mid-block crosswalk locations.     

免棱镜全站仪在旧桥几何尺寸测量中的应用

文章介绍了采用免棱镜全站仪进行旧桥几何尺寸测量的主要内容、优点、测点布置情况及方法,并结合具体工程实例,探讨了免棱镜全站仪的使用效果。     

浅谈合同管理在公路工程建设管理中的作用

合同管理贯穿于公路工程建设的整个过程,阐述了合同管理在招投标、施工等工程建设管理、造价控制中的作用。     

铁路测量设备的计量确认

针对实际工作中对于测量设备计量确认的认识,介绍相关的计量概念,指出在计量工作中易存在的认识误区,说明计量确认对于铁路测量设备管理的必要性,详细介绍计量确认的方法及实施过程。     

适用于我国Ⅲ、Ⅳ级铁路的列控系统

我国Ⅲ、Ⅳ级铁路有配备列控系统的需求.ITCS和ERTMS Regional是适合Ⅲ、Ⅳ级铁路的2种列控系统,介绍了它们的结构和功能特点.